![]() 03/13/2014 at 11:46 • Filed to: Planelopnik | ![]() | ![]() |
Found this on reddit: during a spin maneuver the prop separates from the airplane, and the pilot performs a recovery and lands successfully. Pretty impressive
![]() 03/13/2014 at 11:49 |
|
Holy shit!
![]() 03/13/2014 at 11:52 |
|
Jesus! That's some incredible flying
![]() 03/13/2014 at 11:58 |
|
I thought all fasteners had to be safety wired.
![]() 03/13/2014 at 12:01 |
|
I've seen this happen with RC planes a ton of times. Hell, I've had it happen with an RC plane on the ground. But a full scale? It's insane.
![]() 03/13/2014 at 12:02 |
|
I believe the prop shaft snapped.
![]() 03/13/2014 at 12:09 |
|
That would make more sense.
![]() 03/13/2014 at 12:28 |
|
Every plane has a glide ratio. Without a prop in the way, it improves.
Pitch down to sacrifice altitude for airspeed, once you have enough airspeed, establish speed for best glide and maneuver for best landing location.
![]() 03/13/2014 at 12:48 |
|
What makes this impressive to me is he was in a stall maneuver at low altitude. Very little room for error in that recovery
![]() 03/13/2014 at 12:53 |
|
It's apparently a know issue on certain Lycoming engines, as in, the FAA has issued Airworthiness Directives (ADs) of additional required maintenance for them. http://www.aero-news.net/index.cfm?do=m…
![]() 03/13/2014 at 13:02 |
|
Quick correct thinking followed by quick correct actions. Very impressive.
![]() 03/13/2014 at 15:17 |
|
Odds are decent that a pilot with this level of skill and experience has been at the controls of a glider at some point.
![]() 03/13/2014 at 15:30 |
|
There's a big difference in gliding and recovering from a stall maneuver at low altitude.
This is a very skilled pilot, clearly. Could any other aerobatic pilot have accomplished the same thing? Sure, but that doesn't make it any less impressive.
![]() 03/13/2014 at 22:05 |
|
Here's what it looks like from the cockpit.