"MonkeePuzzle" (monkeypuzzle)
06/26/2020 at 18:28 • Filed to: RuqSaq | 0 | 14 |
so I did some shuffling of the project car and its too many engines over to just one side of the garage so the CR-V could get a spot inside
good luck TSX, left out in the environment (I was unable to move it outside the environment)
facw
> MonkeePuzzle
06/26/2020 at 18:34 | 13 |
RacinBob
> MonkeePuzzle
06/26/2020 at 18:39 | 2 |
Drive the TSX to a parking ramp.....
Akio Ohtori - RIP Oppo
> MonkeePuzzle
06/26/2020 at 18:46 | 0 |
Oof. Sorry to hear it. We had our first hail losses this year and it hurt. Emotionally and financially.
AkursedX
> MonkeePuzzle
06/26/2020 at 18:46 | 2 |
My STI got about 25-30 various sizes hail dents from a rare hailstorm about two weeks ago. I decided to spend roughly $300 in tools and delved into Paintless Dent repair.
Its a lot of work and very much an artform but I’m glad I decided to do it as it’s now a skill I’ll have for the rest of my life. I’m not great by any means, but I can pull and knockdown most round, hail dents to be hardly noticeable
Verdog ~ manual Bro, Bro - HellHawk Equipped
> facw
06/26/2020 at 19:12 | 0 |
That must be one hell of an insurance deductible to be pelted like that!
facw
> Verdog ~ manual Bro, Bro - HellHawk Equipped
06/26/2020 at 19:13 | 0 |
I assume he went liability only or something...
Verdog ~ manual Bro, Bro - HellHawk Equipped
> MonkeePuzzle
06/26/2020 at 19:16 | 1 |
Time for a lift!
Roadkilled
> MonkeePuzzle
06/26/2020 at 19:38 | 0 |
Get the TSX outside the environment? But it’s the CR-V that looks like the front fell off...
66P1800inpieces
> MonkeePuzzle
06/26/2020 at 23:56 | 0 |
Sounds like a job for multiple Harbor Freight moving blankets.
pip bip - choose Corrour
> MonkeePuzzle
06/27/2020 at 06:39 | 0 |
did the front fall off?
jeepoftheseus
> AkursedX
06/27/2020 at 06:48 | 0 |
I’ve been wanting to order some stuff to do that due to a deer that spent most of his life carefully becoming a large buck before deciding that he should run into the side of my suburban. What equipment or kit did you go with?
CaptDale - is secretly British
> MonkeePuzzle
06/27/2020 at 11:29 | 1 |
Have you tried removing the environment from the outside?
AkursedX
> jeepoftheseus
06/27/2020 at 11:45 | 1 |
I went with a puller from a company called Kecotabs. It was their robo mini-lifter. I then bought their precision base so I could have more isolated pulls. That together is like $200. I then bought a variety sized round pack of their pulling tabs along with their tabweld glue. I then bought a knockdown off amazon with various heads. The system I got is generally for smaller stuff, but they also have various tools to help pull bigger, more complex dents too. www.kecotabs.com
MonkeePuzzle
> pip bip - choose Corrour
06/27/2020 at 13:16 | 1 |
some of them are made so the front doesn’t fall off at all