"RamblinRover Luxury-Yacht" (ramblininexile) 03/30/2018 at 15:12 • Filed to: far side friday

4

5

Sorry for sporadic Far Side. I’m in the shop playing with body solder.

crowmolly > RamblinRover Luxury-Yacht 03/30/2018 at 15:16

0

Pics plz

And be safe d00d, especially if you are melting old seams.

Chariotoflove > RamblinRover Luxury-Yacht 03/30/2018 at 17:11

0

I too have been lax in my replies.

RamblinRover Luxury-Yacht > crowmolly 03/30/2018 at 18:43

0

There is an old seam, but I’m not de-leading it. I figure the chip it’s got lends character. Oh, and it’s got a slug of lead that must be a half pound worth. Fuck that.

The solder I’m putting in is on the seams on the Ranchero where I replaced the rear fenders’ bottom thirds, on the back corners where I altered it for the Mustang bumpers, a spot on the corner where a dimdum hit it, a bad Bondo repair on the bed shoulder, the patch I put in where I deleted the fuel fill, and a seam on the edges of my repair panels where they were too short.

So, an assload. Also, and finally, smoothing out my passenger side repair piece, because I tried to remove an oilcan in it behind the wheel and royally emfuckinated it some months back.

I will try to take pics tomorrow afternoon. I will ping you with a reply here then.

RamblinRover Luxury-Yacht > crowmolly 03/30/2018 at 18:56

0

Also, acid flux’n’solder in an open cut is FUCKING OW OW OW.

RamblinRover Luxury-Yacht > crowmolly 03/31/2018 at 18:56

0

Post up: https://oppositelock.kinja.com/dr-solderslove-or-how-i-came-to-stop-worrying-and-lov-1824235149