![]() 09/15/2017 at 11:17 • Filed to: None | ![]() | ![]() |
Or anyone else, naturally. What can I do about this?
One piece has already fallen off (I have it. Not sure if it’s any use).
I’m not super concerned because these seats aren’t wonderful (shitty bolstering) anyway and eventually I want to replace them with H3 seats. Or, if bolstering can be added, recover them with some actual leather instead of this vinyl crap. Still, I’m not exactly in a hurry to finish destroying the seat... so what can I do to patch this up a little that won’t look like shit?
ALSO YES I KNOW I NEED TO VACUUM MY TRUCK SHUT UP
Thoughts? Any help would be appreciated.
![]() 09/15/2017 at 11:22 |
|
Sell the truck.
![]() 09/15/2017 at 11:23 |
|
Burn the car.
![]() 09/15/2017 at 11:24 |
|
![]() 09/15/2017 at 11:25 |
|
Time for a Mexican blanket
![]() 09/15/2017 at 11:25 |
|
JB Weld.
![]() 09/15/2017 at 11:26 |
|
A custom upholstery shop should be able to fix that up. My E46 had a tear in the upper bolster when I bought it, the dealer paid to have it fixed, so I’m not sure what it cost.
![]() 09/15/2017 at 11:26 |
|
Seriously, though. This looks interesting:
![]() 09/15/2017 at 11:29 |
|
That look killer with some beads on top:
![]() 09/15/2017 at 11:33 |
|
WELL, FUCK YOU TOO
*sob*
![]() 09/15/2017 at 11:33 |
|
EVERYONE IS SO CRUEL
![]() 09/15/2017 at 11:34 |
|
Sorry. I got nuthin.
![]() 09/15/2017 at 11:34 |
|
Better than black duct tape I guess.
![]() 09/15/2017 at 11:35 |
|
I had a bead seat cover in my 88 Fox. I rather liked it.
![]() 09/15/2017 at 11:35 |
|
First I need a bench seat... hmmm...
![]() 09/15/2017 at 11:36 |
|
That works for this kind of stuff? I’d have thought it set too hard and would cause more cracking.
Hmmm. I’ll consider that one.
![]() 09/15/2017 at 11:37 |
|
Hey, worth a shot... worst they can tell me is it’s they can’t do it or it’ll be super expensive
![]() 09/15/2017 at 11:37 |
|
https://www.amazon.com/3M-08579-Leather-Vinyl-Repair/dp/B0058WXNOK
![]() 09/15/2017 at 11:39 |
|
Very interesting. Bookmarked. I’m going to check that out for sure.
![]() 09/15/2017 at 11:40 |
|
Please don’t use JB Weld on your seat.
![]() 09/15/2017 at 11:40 |
|
That’s alright... just keep making aviation posts :)
![]() 09/15/2017 at 11:40 |
|
I had one in my 280z! Back when I was cool.
![]() 09/15/2017 at 11:44 |
|
Thanks
I’ll consider that one.
![]() 09/15/2017 at 11:51 |
|
Steve has the “lemon law bible” on amazon prime e-book. If you got prime you can read it for free
![]() 09/15/2017 at 12:00 |
|
You could do a blanket a seat
![]() 09/15/2017 at 12:00 |
|
He isn’t driving a Taxi
![]() 09/15/2017 at 12:02 |
|
I suppose that counts as a thought
![]() 09/15/2017 at 12:32 |
|
Just take it to a local upholstery shop. They’ll be able to sew in a new piece of material for not very much money, and they’ll probably be happy to refresh that portion of the foam while they’ve got the seat out and the cover off. I’ve had things like this fixed before and it has never cost more than $100, even on a leather seat. If you show up with cash, don’t need a receipt and don’t care if the material is an exact and perfect match, it will probably cost even less.
![]() 09/15/2017 at 12:34 |
|
This is probably best... on the other hand, if that’s what it’ll come to I’ll probably just wait until it falls apart properly
![]() 09/15/2017 at 12:57 |
|
Wait, that was not the answer you looking for?!
![]() 09/15/2017 at 13:03 |
|
:(
![]() 09/15/2017 at 13:20 |
|
Burn it, take the insurance, buy Syclone.
![]() 09/15/2017 at 13:24 |
|
There is that... but better to sell it than go through insurance.
![]() 09/15/2017 at 17:04 |
|
I repair this kind of stuff. Normally this repair doesn’t last a long time because it’s the worn seat cushion that’s to blame. Replacing the seat cushion would make it last longer, but it’s possible to get some mileage out of a proper repair.
That said, people that do what I do for a living are, sadly, usually poorly trained using shit material so it’s a bit of a gamble. Asking your local high end used car dealers who they use is a start. Usually the franchise guys (like Dr.Vinyl, Fabrion, Autoqual) are a poor bet. I’m in northern Delaware if that helps. I’d say a cost on this repair would fall in anywhere from $45-$75. I’d do it for a drink.
Of course as mentioned a new piece of vinyl sewn in is best and not pricey either, but don’t do that without new seat foam as it’ll just happen again...they cost roughly $100 normally.
![]() 09/15/2017 at 22:33 |
|
Good to know. In that case I might as well wait for it to unravel itself more before fixing it properly.
Black caulking, here I come.