![]() 09/13/2017 at 23:06 • Filed to: None | ![]() | ![]() |
There’s just a bit of slop in this sway bar bushing. All of the slop, actually. The power steering high pressure line got a nice hole in it which jetted a nice stream of PS fluid right on the fan which slung it alllll over the underside of the car. $30 later a new line was in.
A crows foot, swivel extension, and a LOT of swearing were involved to get this bastard out. It’s the one in the lower right. Nasty. Unfortunately the parts store locally didn’t have the 15/16th of an inch sway bar bushings I need, so I ordered a pair off of Rockauto for $1.50 apiece. Should be here within a week or so, I hope.
![]() 09/13/2017 at 23:18 |
|
Free rust proofing.
![]() 09/13/2017 at 23:55 |
|
Yeah, those fittings are not fun. The bushings will go much easier, especially if they’re split ones.
![]() 09/14/2017 at 00:40 |
|
Free fire starting.
![]() 09/14/2017 at 09:12 |
|
For sure. I’ll have to hammer that bracket back into shape though. The sway bar going clunk clunk has deformed it a bit.