I am frustrated. Brakes.

Kinja'd!!! "mazda616" (mazda616)
04/08/2017 at 20:25 • Filed to: Brakes

Kinja'd!!!0 Kinja'd!!! 5
Kinja'd!!!

15,700 miles and I think my rotors are slightly warped. Braking over halfway full from 60-65 produces an ever so slight vibration. Nothing bad, but it’s there. It doesn’t shake the steering wheel but I can feel it all the same.

There are two things that can cause this: heat and over tightening their lug nuts. Neither of which has happened in excess as far as I know. Sigh.

At least I know a local shop that can turn the rotors. We had to have my wife’s CX-5's rotors turned at 30k and I attributed it to her driving. Now, I’m not so sure.


DISCUSSION (5)


Kinja'd!!! e36Jeff now drives a ZHP > mazda616
04/08/2017 at 20:35

Kinja'd!!!1

you missed one other possible reason, pad deposits. if its pad deposits, you can fix it with a rotor hone for about $30. Unfortunatly there is no good way to tell the difference between a warped rotor or pad deposits.


Kinja'd!!! Highlander-Datsuns are Forever > mazda616
04/08/2017 at 20:35

Kinja'd!!!0

That does seem odd, maybe try rotating the tires.


Kinja'd!!! Funktheduck > mazda616
04/08/2017 at 20:38

Kinja'd!!!0

I had the same problem in my 3. Under certain braking conditions the steering wheel would shake/shimmy somewhat but braking effectiveness seemed unaltered. It went away on its own before I had a chance to have it looked at


Kinja'd!!! wafflesnfalafel > mazda616
04/08/2017 at 21:17

Kinja'd!!!0

I had that happen on my Mazda 3 at about 45,000 - I chocked it up to several less than successful trips to tire shop. I priced turning the rotor and it’s not that much more to get brand new ones - and that completely solved the problem.


Kinja'd!!! pip bip - choose Corrour > mazda616
04/09/2017 at 04:12

Kinja'd!!!0

mine shudder and knock bad, doesn’t concern me though