More Removing A/C Stuff.

"Brickman" (legomaniacman) 03/24/2017 at 18:20 • Filed to: None

3

6

After removing the dash, I went ahead and opened the A/C system up to see the leaky evaporator.

Decades of dust, dog hair and god knows what. Blend door is disgusting. Dodge made it out of foam covered plastic. Fan motor doesn’t spin too good, not sure if thats the way its supposed to be or bearings worn out.

Didnt have to drain the coolant. Had enough heater hose to pull the unit inside and prop up unit with scrap wood.

Found make up bottle under carpet. I swear its not mine ;)

Blower motor resistor isnt looking too good. Best to change it out while it’s easy to get to.

Ewww, what is that?

Used to be styrofoam, eaten away by the leaking refrigerant. I’ll be adding cork tape on the new evap core.

Thats how I knew it was the evap core. No other reason why neon green water (under a UV light) was coming out of the A/C drain

I keep all the nuts and bolts organized :)

I didn’t plan on getting this far til sunday. Im ahead of schedule on my project, which is now delayed til I get a blower resistor.

Tomorrow I will clean the years of dust out.

For Sweden > Brickman 03/24/2017 at 18:25

0

Forgive my ignorance, but is the drain you speak of the coolant drain plug?

/I may or may not currently have an A/C issue

Brickman > For Sweden 03/24/2017 at 18:30

0

The A/C drain, when using a UV light. I should be more clear :)

Highlander-Datsuns are Forever > Brickman 03/24/2017 at 18:32

0

That’s an undertaking I would never even try.

Maxima Speed > Brickman 03/24/2017 at 18:34

3

Pretty sure that’s a turbo encabulator bro.

Brickman > Highlander-Datsuns are Forever 03/24/2017 at 18:34

0

It is, but worth it.

Brickman > Maxima Speed 03/24/2017 at 18:48

1

Only serviceable with a left handed unobtainum socket.