"MonkeePuzzle" (monkeypuzzle)
09/23/2015 at 11:59 • Filed to: None
1
3|
"MonkeePuzzle" (monkeypuzzle)
09/23/2015 at 11:59 • Filed to: None | 1
| 3 |
got my car running again by mish mashing a bolt on exhaust from cat to axle, and a slip on exhaust from axle back
didn’t want to weld because my plan is buy a suitable bolt on for axle back in the near future to resolve my issue correctly
it was flangetastic (to quote my punny brother), and felt all a big Men Of Honor-ish
CalzoneGolem
> MonkeePuzzle
09/23/2015 at 12:05 |
|
Sexy!
|
MonkeePuzzle
> MonkeePuzzle
09/23/2015 at 12:08 |
|
I trimmed it and removed sharp corners.
essentially, the only bolt on flange the slip fit exhaust system had was the cat connector, which is 3 bolt. so this lets me connect 3 bolt flange to 2 bolt flange. a little high temp gasket and should be sufficient for the hopefully brief time I use it.
Jake Huitt - Two Alfas And A Nissan, Not A Single Running Car
> MonkeePuzzle
09/23/2015 at 12:54 |
|
So you don’t need the welder/plasma cutter?