Update(1) Ford Racing brake duct kit install begins...

Kinja'd!!! "ManualTransMan" (loremipsum-00998877)
05/21/2014 at 10:11 • Filed to: None

Kinja'd!!!5 Kinja'd!!! 14
Kinja'd!!!

Getting a car on jack stands is terrifying!

Update. Wheel liners are out and lower facia is off.

Kinja'd!!!

DISCUSSION (14)


Kinja'd!!! Lekker > ManualTransMan
05/21/2014 at 10:17

Kinja'd!!!2

Be super fucking careful. Last time I worked under a car the pavement underneath (newly paved apartments) "dented" just enough to give the jackstands a reason to tip over and let the car fall on me. Which at the time (I was 18, duh) was only about 2" from the ground. I cannot stress this enough, even if you're sure it won't fall, make sure someone can hear you or see you. It saved my life.

On a less sad note, holy shit that is gorgeous.


Kinja'd!!! Yowen - not necessarily not spaghetti and meatballs > ManualTransMan
05/21/2014 at 10:22

Kinja'd!!!0

Yeah... For me to drain/replace fluid for my SHO's PTU (transfers power to rear) and RDU (pretty much a transfer case, I suppose), I'd have to get the car up on four jackstands, that scares me, haha. I think maybe I'll have someone do it for me, someone with a lift.

Good luck on the duct install! Do you track the car? Are you doing this to get less brake fade?


Kinja'd!!! Lumpy44, Proprietor Of Fine Gif > Lekker
05/21/2014 at 10:23

Kinja'd!!!1

I can't agree more with this, I also leave the jack under as a back up. Wheel chocks help too!


Kinja'd!!! Dusty Ventures > Lekker
05/21/2014 at 10:32

Kinja'd!!!1

In rally we protect ourselves against such a possibility by putting boards under the jack stands. Levels out the terrain and gives a larger, more stable footprint.


Kinja'd!!! offroadkarter > ManualTransMan
05/21/2014 at 10:43

Kinja'd!!!0

fuck yeah boss 302

you haven't had any trans issues right?


Kinja'd!!! BigBlock440 > ManualTransMan
05/21/2014 at 10:44

Kinja'd!!!1

When I take a tire off, it goes under the car. That way if it falls, it'll only fall as far as the rim and you could still get a jack under it and/or not get crushed completely.


Kinja'd!!! chuck07 > Lekker
05/21/2014 at 10:49

Kinja'd!!!0

I have a couple dents in the driveway from jacking a 96 Accord. Learned Quickly to never jack a car in the heat


Kinja'd!!! crowmolly > ManualTransMan
05/21/2014 at 10:52

Kinja'd!!!0

That little trolley jack is probably also straining. I'm sure it's rated for the car but the cylinder is small.

When I put a car up on stands it's always on a hard surface or 1'x1' hard wood stand pads. Tires go under the car if they can fit and I always, ALWAYS leave the jack pumped up to the frame with the handle turned in the "pump" direction. That way it acts like a 5th jack stand and somebody can get the car up in a hurry if need be.


Kinja'd!!! anothermiatafanboy > ManualTransMan
05/21/2014 at 10:52

Kinja'd!!!0

Awesome boss! So glad they went n/a on that one instead of just slapping on a supercharger. Question: How did you get approved to post? Who did you have to email/bribe? Please help me out I ask and I ask and nobody will friggin tell me!


Kinja'd!!! Lekker > chuck07
05/21/2014 at 10:56

Kinja'd!!!0

Ha, ironically it was in the middle of the summer in AZ when it happened. 116F might not help the case. Glad you're okay


Kinja'd!!! Lekker > Lumpy44, Proprietor Of Fine Gif
05/21/2014 at 10:57

Kinja'd!!!0

I couldn't fit the jack under, mostly because it was a proper jack and my POS ride at the time was slammed. This is a must for anyone working on cars while lifted. Seriously


Kinja'd!!! Lekker > Dusty Ventures
05/21/2014 at 10:58

Kinja'd!!!0

I hadn't thought of that before. Just like a camel's paw its wide for more area... that is genius especially given that you probably have to work on random conditions. I will remember this if I ever have to do work in the dirt/other material


Kinja'd!!! Pixel > Lekker
05/21/2014 at 11:00

Kinja'd!!!0

I always keep a couple squares of plywood with my jack stands, if you're jacking on asphalt they prevent the stand from sinking in. Also when I remove a wheel it gets shoved under the car as a backup.


Kinja'd!!! Lekker > Pixel
05/21/2014 at 12:01

Kinja'd!!!0

I'm going to have to start doing this. I have to jump under my car pretty soon and I was going to put it on two small ramps and jack the back, but I will also add the plywood.