Hnnnnnnnnnnnnnng

"YSI-what can brown do for you" (ysi-what-can-brown-do-for-you) 04/23/2014 at 13:05 • Filed to: None

3

16

Forgetful > YSI-what can brown do for you 04/23/2014 at 13:19

0

Everything but the taillights.

Looks great in that colour.

YSI-what can brown do for you > Forgetful 04/23/2014 at 13:22

0

Yeah give the buddy clubs a few years and they will look beyond tacky. I mean they already do.

Burrito de EJ25 > YSI-what can brown do for you 04/23/2014 at 13:27

0

I think it's too low. Other than that it looks pretty damn good. I even like the aftermarket taillights.

YSI-what can brown do for you > Burrito de EJ25 04/23/2014 at 13:29

0

I am not too big on the lights, they are basically trying to make them look like the Lambos LEDs, and it kind of looks cheesy.

Forgetful > YSI-what can brown do for you 04/23/2014 at 13:33

0

I've lost interest in the Valentis too. Looking at the white/red ones on an darker cars and it's a bit much.

And the turn signals look cheap.

I'm either going to buy these used red tinted stock lamps if they haven't sold by the weekend (payday), or I'll paint mine. I'd rather buy used so that I can keep my stock ones clear.

Burrito de EJ25 > YSI-what can brown do for you 04/23/2014 at 13:36

0

Yeah, but the stock lights are pretty tacky already.

YSI-what can brown do for you > Burrito de EJ25 04/23/2014 at 13:40

0

True story. It was rice from factory.

YSI-what can brown do for you > Forgetful 04/23/2014 at 13:43

0

I think you can remove the paint fairly easily if you wanted too. I would just paint them myself. Just do a bit of searching before you do. In the end though it is like 20 bucks to paint them yourself.

Forgetful > YSI-what can brown do for you 04/23/2014 at 13:48

0

It's the reading of the DIY thread that has me worried about ending up with cloudy, flaking tint.

I've seen a couple tint jobs where they left the signal area clear. I would go for that if I did it myself.

YSI-what can brown do for you > Forgetful 04/23/2014 at 13:53

0

Don't take my word for it, but I heard you can remove it with some acetone or something similar. I am going to find out if I can, then I am just going to go for it! I would probably go for all red, just cause I think it looks cleaner.

JDIGGS > YSI-what can brown do for you 04/23/2014 at 14:22

0

That is just HDR'ed release series silver, it doesn't look like that in real life.

CPT Speedbump > YSI-what can brown do for you 04/23/2014 at 16:31

0

So, they make copies of those wheels by Rota..and I'm sure other company's make them too, but which ones are the ones you like? Works?

YSI-what can brown do for you > CPT Speedbump 04/23/2014 at 18:15

0

I personally like stuff by Rays cause they are light, they look great, they come in a large variety of sizes, and they are great for racing! Only problem is that their more affordable stuff is still expensive! 2k for Gram Lights, which are pictured above!

CPT Speedbump > YSI-what can brown do for you 04/23/2014 at 18:23

0

Alright, I want TE37's but am not going to pay over 3 k... But atm Im thinking Work CR Kiwami's, at around 1800. Was thinking Enkei RPF1's, which are lighter..but I'd be more comfy with forged wheels under me then cast

YSI-what can brown do for you > CPT Speedbump 04/23/2014 at 20:26

0

If I remember correctly Work and Enkei both have cast wheels. While yes, forged are stronger and lighter, cast can be just as strong! I think the RPF1 has a more advanced way of casting their rims which makes it lighter and stronger than Work. Hell, race cars use cast wheels! Just as long as they are super light! I don't really like Work, only because they are expensive but they aren't as light as they should be. They do look great though!

Here is a race car on Wedsports which use the same casting process as RPF1s!

CPT Speedbump > YSI-what can brown do for you 04/23/2014 at 20:36

0

Your right, Work's are cast...so I still want Volk, but probably gonna go RPF1, lol