![]() 01/10/2014 at 22:07 • Filed to: None | ![]() | ![]() |
to put heated seats into a Yaris? My wife has one and I would like to put heated seats into it, but I am not sure of the best way to go about it. I have seen the elements for sale, but that would require a reupholster, so what are the chances that a seat from a different Toy has heat and fits? Any thought in the land of Oppo?
![]() 01/10/2014 at 22:10 |
|
Normally you can take the covers off the seats without re-upholstering, that's all I can really add.
![]() 01/10/2014 at 22:11 |
|
Yup, you could get seats from another car, and just wire switches and whatever else is needed. Echo seats might work, don't know if they have heated options. Any seat that's narrow enough should theoretically fit
![]() 01/10/2014 at 22:12 |
|
Step one:
Step two:
In all seriousness, I have no idea. My aunt had aftermarket heated seats in her car and they were always a problem. I probably wouldn't bother with something that is a potential fire risk.
![]() 01/10/2014 at 22:12 |
|
Isn't that hard actually. It may not be cheap, but it isn't complicated. And trust me, with how the weather has been lately, any price would be worth it haha
![]() 01/10/2014 at 22:13 |
|
Ghetto tech route = Easy as pie.
http://www.amazon.com/Roadpro-12-Vol…
!!! UNKNOWN CONTENT TYPE !!!
Just staple the edges to the back of the seat and you good to go.
![]() 01/10/2014 at 22:13 |
|
I think it would be easier to just bolt a new seat in, but it would of course add to the cost. Sometimes, though, easier is better if you can get a good deal.
![]() 01/10/2014 at 22:14 |
|
I will have to look into that. I figured that they would need to very nearly cut off.
![]() 01/10/2014 at 22:15 |
|
Second thought... How about an inverter and a heating pad? Cheap, doesn't require modifications, completely reversible, gone in the summer... Hell I think they might even sell heated seat cushions...
And... they do!
!!! UNKNOWN CONTENT TYPE !!!
![]() 01/10/2014 at 22:15 |
|
yeah, that's my thought as well. One of the reasons I am leaning toward the seat swap.
![]() 01/10/2014 at 22:17 |
|
So the thing with pulling the seat covers off is the hog rings. You need a good sharp set of dykes to cut them out and a set of hog ring pliers to put new rings in when you are putting the cover back on. It isn't hard just time consuming. The wiring will be more difficult than inserting the heating element into the seat cushion.
![]() 01/10/2014 at 22:18 |
|
or if you dont want to get a splitter for the phone charger...
I actually got one of these from Costco (~$17?) and it works surprisingly well. 5 minutes in the microwave will do that for you.
![]() 01/10/2014 at 22:20 |
|
I think you can ask your Toyota dealer to have heated seats installed... I saw someone do that with a Prius (He ordered one without heated seats, when he received the car he requested the dealer to fit them in for him).
![]() 01/10/2014 at 22:21 |
|
Interesting... last year when I was looking, I had seem them, but the ones I had seen all had terrible reviews. Off to the research!!
![]() 01/10/2014 at 22:22 |
|
I think we all know what happens when you take your car to a dealer... Aint nobody got money for that!
![]() 01/10/2014 at 22:22 |
|
I know some aftermarket shops will do it for about 200-300 a seat. A friend of mine got it put in his wife's Hyundai.
![]() 01/10/2014 at 22:23 |
|
I have never done any upholstery, though oddly enough I do have 2 pairs of upholstery pliers. Bought a lot of tools of ebay, and I think they came from an upholstery shop.
![]() 01/10/2014 at 22:27 |
|
It isn't bad, just a little intimidating at first. After you get the first seat done you will either go "hey that wasn't to bad" or "fuck this shit, why did she let me get talked into thinking this was a good idea to do my self. . ."
Take pictures of all the hog ring locations and see if you can find a factory service manual to reference. Take your time and it should be easy. Cloth is MUCH easier to work with than leather.
![]() 01/10/2014 at 22:30 |
|
My only thought is to try junkyards and see if you can find heated seats that fit. I wouldn't imagine the wiring is difficult, but I've also never had any experience with them.
![]() 01/10/2014 at 22:32 |
|
These are the "under the fabric" heaters that I had seen before. I like the factory look and not having to worry about taking them in and out, or attachment straps breaking. for $70 it seems legit...
!!! UNKNOWN CONTENT TYPE !!!
![]() 01/10/2014 at 22:34 |
|
I can do most things mechanical, once I start them, but yeah, it can get intimidating when you first start the ripping.
![]() 01/10/2014 at 22:35 |
|
If you are ripping with the seat covers you are most definitely doing something wrong though. . . Hahaha
![]() 01/10/2014 at 22:35 |
|
yeah, that's what I had been seeing, although more towards the $300 and up. DC area... Buncha rich bastiches around here drivin the price of everything up.
![]() 01/10/2014 at 22:40 |
|
I'm sure it's fairly easy. Running the wiring might be a challenge if there isn't power already under the seat. I would be concerned with refitting the seat cover properly. My 2 cents? Try the removable seat cushion or ghetto inverter-heating pad combo for the winter, then do it right come spring. I wouldn't want to putz with removing seat covers and running wires in the cold of winter, unless you have a somewhat heated garage to work in.
![]() 01/10/2014 at 22:44 |
|
DOH!
![]() 01/10/2014 at 22:45 |
|
look what I found...
![]() 01/10/2014 at 22:47 |
|
Boo! Inverter and heating pad it is! Or find OEM heated seats.
![]() 01/10/2014 at 22:51 |
|
yeah, gonna have to grab the tape measure and see what will work.
![]() 01/10/2014 at 23:39 |
|
WAH WAH!
Glad you looked it up before tearing into that foam. . .
![]() 01/10/2014 at 23:49 |
|
Looks like this guy made a walkthrough that got some good review (need to join the forum though).
http://www.yarisworld.com/forums/showthr…
![]() 01/11/2014 at 00:31 |
|
Just as easy, and I will admit I used this in college and it worked great. Made my own 12V adapter from an ACC fuse and it got hot fast.
![]() 01/11/2014 at 00:38 |
|
Came here to same the same exact thing about a regular plug-in heating pad - no joke.