Look at what my sister messaged me

"YSI-what can brown do for you" (ysi-what-can-brown-do-for-you) 12/05/2013 at 18:17 • Filed to: None

7

77

It is finally here!!! Not in my grasps cause I shipped it to my home address!

Forgetful > YSI-what can brown do for you 12/05/2013 at 18:18

2

Hawt.

scoob > YSI-what can brown do for you 12/05/2013 at 18:19

0

My sister would say "Your bathroom plumbing arrived..."

YSI-what can brown do for you > scoob 12/05/2013 at 18:20

1

Sounds about right. My sister isn't big on cars either, particularly when I tried explaining to her how a rotary works.

Nighthawkwill7, Hoon Depot Manager > YSI-what can brown do for you 12/05/2013 at 18:20

0

Great! How much of an improvement do you gather this will have on your Toyobaru?

Velocity- Peuguette Connoisseur > YSI-what can brown do for you 12/05/2013 at 18:21

1

Das naughty

YSI-what can brown do for you > Nighthawkwill7, Hoon Depot Manager 12/05/2013 at 18:21

0

There haven't been many dynos done with this, but some person did it with just this header and a tune and got about a 18hp gain, so that is pretty sweet for just a bolt on.

Forgetful > Forgetful 12/05/2013 at 18:22

4

Just to clarify, I meant your sister. Nice tubes though.

YSI-what can brown do for you > Forgetful 12/05/2013 at 18:23

2

Dude, she is like 10.

Naw just kidding, she is 17 but I will murder your face if you say anything about my sister. . . it is my duty as her brother.

Forgetful > YSI-what can brown do for you 12/05/2013 at 18:25

0

As you should.

My bad, didn't think she'd be young.

nafsucof > YSI-what can brown do for you 12/05/2013 at 18:26

0

Those look really nice, any extra bungs for data logging? Are you going to run an ap? Do these(brz/gt86) even need that? I read somewhere else there are USB tuning solutions? As in USB=>obd2 from a laptop? I want to do a cat less down pipe but I'm scared of the noise.

Nighthawkwill7, Hoon Depot Manager > YSI-what can brown do for you 12/05/2013 at 18:26

0

That sounds great. I imagine that will add some more punch to the low to midrange part of the powerband.

mattoverdrive > YSI-what can brown do for you 12/05/2013 at 18:27

0

Who makes the header? I'm thinking about getting one when I do the exhaust on the BRZ.

YSI-what can brown do for you > Forgetful 12/05/2013 at 18:27

0

Nah, dude its all good, I was only joking. You don't even know my sister!

YSI-what can brown do for you > nafsucof 12/05/2013 at 18:31

0

There are a few USB tuning solutions and I don't know how I feel about any of them. One requires you to buy a license to use, and when the license is on the ECU you can't flash any other program. The others I haven't looked much into. There aren't any extra bungs for data logging though, which I don't think is a big deal

If you are going catless downpipe find one with resonators, you should be golden then. The noise should be kept down and rasp shouldn't be any worry.

YSI-what can brown do for you > Nighthawkwill7, Hoon Depot Manager 12/05/2013 at 18:32

1

Yup, the torque dip should be almost gone. And this will sound amazing!!

YSI-what can brown do for you > mattoverdrive 12/05/2013 at 18:35

1

JDL Auto Design. I would highly recommend their headers, they even make one for people that want to turbocharge their FRS. Plus if they make a header for any car, it is a work of art.

WORK. OF. ART.

Nighthawkwill7, Hoon Depot Manager > YSI-what can brown do for you 12/05/2013 at 18:36

0

You already have an exhaust to go with the headers?

YSI-what can brown do for you > Nighthawkwill7, Hoon Depot Manager 12/05/2013 at 18:39

0

Yup, this is the last piece of the pie. To be honest, the headers and frontpipe(aka downpipe) are the most important parts. The only reason you should switch out the catback is to reduce some rasp and unnecessary loudness.

It's a "Porch-uh" > YSI-what can brown do for you 12/05/2013 at 18:42

0

Slightly off topic question: Had lunch with a co-worker who owns a BRZ. Says the engine has to be removed to change the spark plugs (according to the internets). He (or anybody else) hasn't had to do it yet, but I call BS. In your opinion, true or not?

It's a "Porch-uh" > It's a "Porch-uh" 12/05/2013 at 18:42

0

Also, sexy header.

Decay buys too many beaters > YSI-what can brown do for you 12/05/2013 at 18:42

1

Awesome, when I finally get my nameless EL setup we'll have to have a "sound off"

Are you planning on getting a tune?

YSI-what can brown do for you > It's a "Porch-uh" 12/05/2013 at 18:44

0

I do infact call BS. Yes it is a pain, but it can be done through the wheel wells. You just have to remove the wheels. Also, thank you very much.

YSI-what can brown do for you > Decay buys too many beaters 12/05/2013 at 18:47

0

Sometime in the near future, yes. Don't know the best path. Lots of people do ECUtek, but I don't know if I like that or not though. What are you going to be using?

Also, aren't the headers supposed to be out sometime soon, I though I heard sometime this month.

It's a "Porch-uh" > YSI-what can brown do for you 12/05/2013 at 18:48

0

Thanks for the info. I will slap him with a torque wrench and throw a plug socket at him for believing everything he reads on the forums.

N/A POWAAAHH > YSI-what can brown do for you 12/05/2013 at 18:49

0

mmmmm! I'm still waiting on mine :(

It's a "Porch-uh" > nafsucof 12/05/2013 at 18:49

0

Haha, "bungs."

Sorry.

YSI-what can brown do for you > It's a "Porch-uh" 12/05/2013 at 18:49

0

If he argues, point him to the owners manual. It should be in there somewhere.

It's a "Porch-uh" > YSI-what can brown do for you 12/05/2013 at 18:50

1

It's difficult to even talk after being hit with a 1/2" drive torque wrench.

Crocket Bernet > It's a "Porch-uh" 12/05/2013 at 18:51

0

It appears thats what the internet (and Subaru) says, which would be a massive pain in the ass without an engine hoist.

YSI-what can brown do for you > N/A POWAAAHH 12/05/2013 at 18:51

0

You own an FRS/BRZ? And did you order these headers? If so, they usually take 3 to 5 weeks to make.

Saracen > YSI-what can brown do for you 12/05/2013 at 18:51

0

Damn sexy headers. Post some videos when you them bolted up!

YSI-what can brown do for you > Saracen 12/05/2013 at 18:52

0

Will do, but I will have to wait. Have to get new gaskets and bolts. Don't want any leaks now do we.

Velocity- Peuguette Connoisseur > YSI-what can brown do for you 12/05/2013 at 18:52

0

Aw dude I'm just the right age for her....hook me up bro! Lololol jk jk

N/A POWAAAHH > YSI-what can brown do for you 12/05/2013 at 18:53

0

No, I bought UELs for my Impreza. And it takes the guy 4 months+ to fabricate them.

Saracen > YSI-what can brown do for you 12/05/2013 at 18:54

0

Definitely not :)

Did you get unequal length collectors?

YSI-what can brown do for you > It's a "Porch-uh" 12/05/2013 at 18:55

1

I generally use hammers for everything. . . knock outs aren't exactly clean though.

YSI-what can brown do for you > Velocity- Peuguette Connoisseur 12/05/2013 at 18:58

1

I will hook you up. . .

IN HELL!!!

#tf2 #demoman

YSI-what can brown do for you > Saracen 12/05/2013 at 18:59

1

Yup, we get a nice rumble in the jungle. All the ladies won't care, but all the subibros will love me :D

YSI-what can brown do for you > Crocket Bernet 12/05/2013 at 19:01

0

You can do it without hoists. . . if you hate yourself. Honestly, don't know how hard it would be concidering no one has done the change yet. Don't know how it is on other Subarus though.

YSI-what can brown do for you > N/A POWAAAHH 12/05/2013 at 19:02

0

I remember now. And I feel for you. I waited nearly a month and a half for this and it was grueling. Stay strong! Stay strong! When are the planning to be done, or do you not know.

imadeaburner > YSI-what can brown do for you 12/05/2013 at 19:03

0

I've undone one motor mount and jacked the motor to do plugs on some Subarus.

It's actually easier than they lead to be.

Argent > YSI-what can brown do for you 12/05/2013 at 19:03

0

Ahhh, I remember having to do the same when changing spark plugs for my family's old Suburban.

AddMustard > YSI-what can brown do for you 12/05/2013 at 19:04

0

Man, I thought removing wheels to replace headlights in my car was stupid....

YSI-what can brown do for you > imadeaburner 12/05/2013 at 19:06

0

Oh really, I was dreading when I had to do this around the 80K mark. Good to know that it won't take a whole weekend to complete.

YSI-what can brown do for you > Argent 12/05/2013 at 19:07

0

That makes sense I guess. Couldn't you do it normally, like through the engine bay?

imadeaburner > YSI-what can brown do for you 12/05/2013 at 19:07

0

I would look and see how far the engine can flex. But that's how I did it in a Forester and a couple Imprezas.

Undo motor mounts, undo the exhaust if needed, Make sure you aren't stretching the harness and what not, and do work.

YSI-what can brown do for you > AddMustard 12/05/2013 at 19:07

0

It is all for supremely sexy engine. . . alright it isn't that sexy but I guess it is worth it.

YSI-what can brown do for you > imadeaburner 12/05/2013 at 19:08

0

I think it can move a bit. To replace the overpipe you have to hoist the engine up a few inches without removing any mounts.

imadeaburner > YSI-what can brown do for you 12/05/2013 at 19:15

0

I would see what others say, but you may be able to move the engine on one mount and do it that way.

I have done valve covers that way too.

Decay buys too many beaters > YSI-what can brown do for you 12/05/2013 at 19:18

0

Yeah that's what I heard as well, I bought myself a bunch store credit at a %15 discount during their black friday sale so I'm pretty much locked in to nameless at this point. Just waiting on release now.

As for tuning, I'll be either going with the Openflash Tablet (if I can get some local tuners who are willing to tune on it) or ECUtek and getting Bob at Drift Office to do the tune, he has been getting some really good results with other N/A setups I've seen.

beardsbynelly - Rikerbeard > YSI-what can brown do for you 12/05/2013 at 19:21

0

insert inappropriate jokes about getting head(ers)

N/A POWAAAHH > YSI-what can brown do for you 12/05/2013 at 19:22

0

It'll be exactly 4 months in 2 days, but I gave the guy an email, and he said he was behind schedule.

YSI-what can brown do for you > Decay buys too many beaters 12/05/2013 at 19:22

0

I might do something with ECUtek and Moto-East because they own a BRZ with these exact headers so they probably know what they are doing. I was looking at OFT as well, people seem to really like it a lot.

Decay buys too many beaters > YSI-what can brown do for you 12/05/2013 at 19:25

0

The only real downside I see to ECUtek is the inability of the user to revert back to a completely stock tune.

YSI-what can brown do for you > Decay buys too many beaters 12/05/2013 at 19:28

0

Because the license is still on there. It shouldn't be too big of a deal, unless the dealer checks the ECU. I don't know why they would unless you have some sort of engine problem.

Decay buys too many beaters > YSI-what can brown do for you 12/05/2013 at 19:32

0

Yeah, but I'd be one of those paranoid guys who would want to revert it to stock before it got anywhere near a dealer. I mean what's to say they would not check when I, for example, go in to get my fuel pump replaced (again)?

Velocity- Peuguette Connoisseur > YSI-what can brown do for you 12/05/2013 at 19:33

0

I haven't played TF2 in too long, man. I need to play again...

YSI-what can brown do for you > Decay buys too many beaters 12/05/2013 at 19:37

0

I would be too, although I rarely go to the dealer unless it is an annoying problem. I am on my 3rd pump and it still makes a sound, but only when it is really cold.

Decay buys too many beaters > YSI-what can brown do for you 12/05/2013 at 19:40

0

Strange, mine only makes the cricket noise when particularly hot. Sounded like mating season under my hood after a few track sessions.

YSI-what can brown do for you > Decay buys too many beaters 12/05/2013 at 19:44

0

Well it is when the engine is hot, but it usually happens during colder weather. Maybe I just notice it then, but that seems to be the pattern.

Argent > YSI-what can brown do for you 12/05/2013 at 19:53

0

Hope I didn't cause any confusion. I meant I remember having to go through the wheel well to change spark plugs. Nothing as drastic as engine removal.

YSI-what can brown do for you > Argent 12/05/2013 at 19:57

0

Alright, that makes more sense. Although, those came with V8s right? I have never changed spark plugs, but I assume you could do it from above for a V8

Arch Duke Maxyenko, Shit Talk Extraordinaire > YSI-what can brown do for you 12/05/2013 at 20:30

0

I just explain it to people like this:

There is a Dorito that spins inside a peanut,

the Red Bull is injected in to the peanut in the left part of the top,

the Dorito rotates causing the red bull to compress against the right side of the peanut,

then a bic is flicked lighting the red bull on fire,

this causes the red bull to explode making the Dorito to rotate more,

the exploded red bull is then farted out the lower left side of the peanut

YSI-what can brown do for you > Arch Duke Maxyenko, Shit Talk Extraordinaire 12/05/2013 at 20:34

1

Red bull isn't the only thing on fire, sometimes some Monster is added in on accident. That is no good.

Arch Duke Maxyenko, Shit Talk Extraordinaire > YSI-what can brown do for you 12/05/2013 at 20:37

0

for some reason, olive oil will get into the mix as well.

YSI-what can brown do for you > Arch Duke Maxyenko, Shit Talk Extraordinaire 12/05/2013 at 20:39

1

And when the Dorito starts to wear you have to go to Alaska and get some baby seals

Arch Duke Maxyenko, Shit Talk Extraordinaire > YSI-what can brown do for you 12/05/2013 at 20:44

0

Saracen > YSI-what can brown do for you 12/05/2013 at 20:44

0

JDL sure does some nice work. Too bad they don't make any Golf R parts yet.

YSI-what can brown do for you > Arch Duke Maxyenko, Shit Talk Extraordinaire 12/05/2013 at 20:46

1

The best way to ki- er I mean capture them.

Arch Duke Maxyenko, Shit Talk Extraordinaire > YSI-what can brown do for you 12/05/2013 at 20:47

0

I kept at it, work now?

YSI-what can brown do for you > Saracen 12/05/2013 at 20:49

0

How old is the car? I know they make a lot of exhaust parts for VW. If it is fairly new give it some time cause it is worth it!

YSI-what can brown do for you > Arch Duke Maxyenko, Shit Talk Extraordinaire 12/05/2013 at 20:49

1

Yup yup! It worked as soon as I posted the picture. I think it is sentient.

Arch Duke Maxyenko, Shit Talk Extraordinaire > YSI-what can brown do for you 12/05/2013 at 20:52

0

Dear kinja,

5/0=

Saracen > YSI-what can brown do for you 12/05/2013 at 20:58

0

it's a 2012 model.

YSI-what can brown do for you > Saracen 12/05/2013 at 21:01

0

Contact them and see what is up. They aren't a big operation, so you will probably get someone who knows what is up.

mattoverdrive > It's a "Porch-uh" 12/05/2013 at 22:49

0

The dealer service manuals that are floating out in internet-land do say that the engine needs to be removed. I'll try to find the link when I get home.

However, I'm sure it's not strictly required, or at least I hope so.

mattoverdrive > mattoverdrive 12/05/2013 at 23:39

0

Here's the link where I found the manuals. http://www.ft86club.com/forums/showthr…