"Bandit" (2bandit)
10/24/2013 at 23:13 • Filed to: emma
0
5|
"Bandit" (2bandit)
10/24/2013 at 23:13 • Filed to: emma | 0
| 5 |
They are pads that isolate the radiator from the core support.
wabbastang
> Bandit
10/24/2013 at 23:32 |
|
Without having any idea of what you are working on... There are probably a pair of metal brackets top and bottom that clamp the radiator in place; those likely sit inside those brackets and everything gets clamped back together.
Example..
|
Bandit
> wabbastang
10/24/2013 at 23:39 |
|
Thanks.
|
Bandit
> wabbastang
10/24/2013 at 23:42 |
|
Now I just need to figure out how my radiator brackets go on...
deekster_caddy
> Bandit
10/24/2013 at 23:45 |
|
Two of them go in the trough shaped thing that goes under the radiator, two of them go into the top flat thing that goes across the radiator and the support beam in front of it with the hood latch. They are probably called upper and lower radiator supports ;) The straight rubber peg sits in a small hole, and the cone shaped peg gets pulled through the other hole so that it kind of snaps into place. If that's not good enough information I could probably go take a picture or something.
rabbitman
> deekster_caddy
10/25/2013 at 00:13 |
|
yea that's about right upper and lower where it actaully sits in the core, but is seems these are the same in all GM f body's and GM's with small block v8's non heavy duty
http://www.fbodywarehouse.com/fbw/product.ph…
these below go on the fan shroud. but look a little different
http://www.firebirdcentral.com/1970_1981_Radi…
New upper or lower radiator rubber mount pad for your Firebird. Fits both upper and lower mounting points on fan shroud. Exact fit for all 70-81 Firebird Trans Am with 4 core radiator. Four required per car, sold each. Nipples / prongs must be cut off before installing.