by "Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
Published 11/07/2017 at 18:50
by "Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
Published 11/07/2017 at 18:50
No Tags
STARS: 0
Who makes these 2 port valve cover vents for a catch can setup? I quickly checked vibrant but didn’t see anything.
Hopefully you guys can help!
"Spanfeller is a twat" (theaspiringengineer)
11/07/2017 at 18:52, STARS: 0
You could probably get someone to design one and print it/machine it. try local car club/nerd ring/university student desperate for a project and cash
"CaptDale - is secretly British" (captdale)
11/07/2017 at 19:04, STARS: 0
Odd, I don’t see one just through quick searching. No brand I am assuming? Is the application limited to Viper or is is a universal set up you are looking for?
"Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
11/07/2017 at 19:07, STARS: 0
It should just be a generic company like Vibrant, Earls, Summit, etc.
I just tried typing in a few things to search for it but no luck?
“2-port valve cover vent”
“Valve Cover Vent Manifold”
“Valve cover manifold AN fitting”
Can’t seem to find it yet!
"CaptDale - is secretly British" (captdale)
11/07/2017 at 19:09, STARS: 0
I even did a reverse image search and nothing
"notsomethingstructural" (notsomethingstructural)
11/07/2017 at 19:12, STARS: 0
i must be confused. is this an adapter for the PCV or is it the PCV itself? are these inlets or outlets?
"Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
11/07/2017 at 19:15, STARS: 0
Yeah I took the images from a kit that contains them but not much info!
"Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
11/07/2017 at 19:16, STARS: 0
They are basically an adapter. Similar to how you see people weld -10AN or -12AN fittings to their valve covers. This does something similar except it has 2 ports and also you don’t have to run 90* fittings instantly off it like most setups. No valve or anything in this just those 2 ports into that AN fitting.
Maybe Jegs? I have to keep digging...
"GoodIdeaAtTheTime" (waystufffails)
11/07/2017 at 19:17, STARS: 0
This breather was developed by Exotic Engine Development. I do not know if they still make it. You’d have to get in contact with them if it is still available. Had one on my Ram SRT10, back in like 06 or 07.
"TractorPillow" (tractorpillow)
11/07/2017 at 19:29, STARS: 0
Whenever I needed an answer to Viper things I called Jon at viperpartsrack. Dude always answered, and even though he is rough around the edges, is incredibly helpful and will search anything down for you.
When I made the dumb decision to drive the Viper from Atlanta to El Paso and got a destroyed tire thanks to a monster bolt in the road he was able to source me tires and overnight them to me in San Antonio that DiscountTire couldn’t even find in their system.
"beardsbynelly - Rikerbeard" (beardsbynelly-Rikerbeard)
11/07/2017 at 19:35, STARS: 1
Google reverse image takes me to
http://www.viperalley.com/forum/viper-discussions-gen-i/146593-catch-can-would-you.html
from the comments it seems it’s a custom made part from AC Performance. Scroll to Todd Abrams.
"crowmolly" (crowmolly)
11/07/2017 at 20:38, STARS: 1
A&C breather kit. Looks like AN8. Block is proprietary from what I can see.
"shpuker" (shpuker)
11/07/2017 at 22:08, STARS: 1
Well I found this:
http://www.viperalley.com/forum/viper-discussions-gen-i/107210-n-oil-catch-can.html
"Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
11/08/2017 at 18:43, STARS: 0
Good find! I saw the kit but want to find who makes just that fitting/manifold so I can build my own kit :D
"Boosted2k - I Make Videos and Put Them on YouTube" (boosted-2k)
11/08/2017 at 18:44, STARS: 0
Yeah I saw the kit from A&C but want to find who makes just that fitting/manifold so I can build my own kit :D
"shpuker" (shpuker)
11/08/2017 at 22:48, STARS: 0
Could always make an account on that forum and shoot them a message asking