by "HammerheadFistpunch" (hammerheadfistpunch)
Published 09/28/2017 at 11:52
No Tags
STARS: 13
Two of them actually.
Front is a double cardan/CV. Rear is u joints only. Both custom made with thick DOM tubing and Spicer 1310 joints.
The best part of that classy bright yellow sticker it comes with? “My Shaft’s A Woody” is trademarked.
"benjrblant" (benjblant)
09/28/2017 at 11:55, STARS: 0
no DC for the rear?
"benjrblant" (benjblant)
09/28/2017 at 11:55, STARS: 0
Plus, going to keep your OEM ones for a trail spare?
"TheHondaBro" (wwaveform)
09/28/2017 at 12:00, STARS: 0
Delivery guy gave you some wood.
"benjrblant" (benjblant)
09/28/2017 at 12:01, STARS: 0
Posting it again because despite kinja saying my comment was successfully published, it’s now gone.
1) No DC shaft for the rear?
2) Keeping the OEM as a spare?
"HammerheadFistpunch" (hammerheadfistpunch)
09/28/2017 at 12:02, STARS: 0
Rear doesn’t need it, pinion angles are good. I will keep the rear as a spare but the front is probably no good.
"TheBloody, Oppositelock lives on in our shitposts." (thebloody)
09/28/2017 at 12:03, STARS: 0
Probably would be best to have the balancing tested before installing, I know a few guys who had some balancing issues.
"benjrblant" (benjblant)
09/28/2017 at 12:04, STARS: 0
Oh, that’s right. Forgot the slip yoke was toasted.
"CalzoneGolem" (calzonegolem)
09/28/2017 at 12:27, STARS: 1
Did he keep the goldmine?
!!! UNKNOWN CONTENT TYPE !!!
"HammerheadFistpunch" (hammerheadfistpunch)
09/28/2017 at 12:30, STARS: 0
Pretty much. Actually pretty reasonable for custom work. I ordered it on Monday, it showed up Wednesday and it cost $10 to ship. Not too bad.
"XJDano" (xjdano)
09/28/2017 at 12:31, STARS: 0
One mistake I made after i installed mine years ago was I didn’t need fill the u-joints after installation. And the build grease wasn’t much. The needles turned to powder.
So pump some grease in Them after you install it.
"HammerheadFistpunch" (hammerheadfistpunch)
09/28/2017 at 12:36, STARS: 0
They have many grease in them now, but the “instructions” do say to refill after install. I bought some high moly #2 but they recommend #1 for the slip joints and #2 for the ujoints. WHY?!
"Rock Bottom" (rockbottom81)
09/28/2017 at 12:45, STARS: 0
Lol, Tom gave me his wood a few weeks ago. They seem to be pretty good shafts for the price.
"Urambo Tauro" (urambotauro)
09/28/2017 at 12:52, STARS: 1
So that’s what brown can do for you.
"HammerheadFistpunch" (hammerheadfistpunch)
09/28/2017 at 13:12, STARS: 0
yup. There is at least 3 degrees of play in the back one.
"CalzoneGolem" (calzonegolem)
09/28/2017 at 13:19, STARS: 0
That’s some nice shipping.