by "Jake - Has Bad Luck So You Don't Have To" (murdersofa)
Published 09/13/2017 at 23:06
by "Jake - Has Bad Luck So You Don't Have To" (murdersofa)
Published 09/13/2017 at 23:06
No Tags
STARS: 0
There’s just a bit of slop in this sway bar bushing. All of the slop, actually. The power steering high pressure line got a nice hole in it which jetted a nice stream of PS fluid right on the fan which slung it alllll over the underside of the car. $30 later a new line was in.
A crows foot, swivel extension, and a LOT of swearing were involved to get this bastard out. It’s the one in the lower right. Nasty. Unfortunately the parts store locally didn’t have the 15/16th of an inch sway bar bushings I need, so I ordered a pair off of Rockauto for $1.50 apiece. Should be here within a week or so, I hope.
"The Crazy Kanuck; RIP Oppositelock" (jukesjukesjukes)
09/13/2017 at 23:18, STARS: 4
Free rust proofing.
"Urambo Tauro" (urambotauro)
09/13/2017 at 23:55, STARS: 1
Yeah, those fittings are not fun. The bushings will go much easier, especially if they’re split ones.
"Bman76 (hates WS6 hoods, is on his phone and has 4 burners now)" (bman76-4)
09/14/2017 at 00:40, STARS: 1
Free fire starting.
"Jake - Has Bad Luck So You Don't Have To" (murdersofa)
09/14/2017 at 09:12, STARS: 2
For sure. I’ll have to hammer that bracket back into shape though. The sway bar going clunk clunk has deformed it a bit.