by "nerd_racing" (nerd189)
Published 08/30/2017 at 08:47
by "nerd_racing" (nerd189)
Published 08/30/2017 at 08:47
No Tags
STARS: 0
I installed a Robbins NB glass window soft top on my dad’s 95 miata. It was from my parts car that must have had an NB frame on it. I don’t have the window support straps you are supposed to use, or the elastic ones that help move the floating rib.
Does anyone have access to the proper strap length so I can make some? I feel bad that I put the top on for my dad and now it doesn’t function properly.
"Wrong Wheel Drive (41%)" (rduncan5678)
08/30/2017 at 09:23, STARS: 0
I’ve got a Robbins top with glass window (nonzipper) on my NB, I can try to take some measurements if you could better explain what I am looking for. What dimensions are you looking for? And can they be measured on the car?
"nerd_racing" (nerd189)
08/30/2017 at 09:27, STARS: 0
If you could measure the distance between the rear most bow and the next bow forward when the top is up, and the distance between the rear most bow to where the top strap connects to the body mount stud that would be awesome! I’ll probably have to make my own straps. Robbins is not answering me back.
"Wrong Wheel Drive (41%)" (rduncan5678)
08/30/2017 at 10:10, STARS: 0
You’re talking about this right?
If so, I should be able to take a measuring tape to it after work and take a couple pictures. Roll bar might be in the way visually but it should help.
"nerd_racing" (nerd189)
08/30/2017 at 10:15, STARS: 1
yes, the space between bow 3 and 4 and between 4 and the spot where it attaches to the mount stud. Thank you!