by "razorbeamteam" (razorbeamteam)
Published 07/18/2017 at 16:13
by "razorbeamteam" (razorbeamteam)
Published 07/18/2017 at 16:13
No Tags
STARS: 0
What about axe rash?
"E92M3" (E46M3)
07/18/2017 at 16:17, STARS: 0
Never seen that before.... I would of went to a tire shop to see what they could do first.
"CalzoneGolem" (calzonegolem)
07/18/2017 at 16:18, STARS: 0
Yikes. Looks like they should have asked the clever men about 6 hours ago.
"KevlarRx7" (kevlarsupra)
07/18/2017 at 16:18, STARS: 1
Saw that a while back, still wondering why he didn’t just give up before he made such a mess, there are tools for that exact problem.
"PartyPooper2012" (PartyPooper2012)
07/18/2017 at 16:19, STARS: 1
yeah... what you want to do now... is basically cut the rim so you can get the wheel off. Then you can probably remove the nut or hub.
My neighbor had this same issue. He tried same way you are doing it. Until he got one of those hole cutters for metal. You want one without a drill bit in the center and you want it deep so you can go over the stud and nut/bolt. Cut a hole big enough for the nut/bolt to slide through it and you can get the wheel off.
Discard the rim and get a new one.
"PartyPooper2012" (PartyPooper2012)
07/18/2017 at 16:19, STARS: 0
It does look pretty like that tho. all 3D and shit
"razorbeamteam" (razorbeamteam)
07/18/2017 at 16:22, STARS: 0
This was just on my GF’s facebook feed. I just shared here for the lolz.
"crowmolly" (crowmolly)
07/18/2017 at 16:25, STARS: 0
Hole saw in the lug hole.
Edit: I thought it was a nut with a spinning lug. Oops
"PartyPooper2012" (PartyPooper2012)
07/18/2017 at 16:25, STARS: 0
yeah. i saw that... and somehow wanted to help out... to anyone who was in the same predicament.
"Rust and Dust - Oppositelock Forever" (rustanddust)
07/18/2017 at 16:25, STARS: 1
I’m hoping this isn’t yours (pretty sure I saw this elsewhere a couple days ago, and if you’re cutting up a rover, I’m guessing you can sort out how to remove a locking lug without destroying a wheel), but if it is/you ever encounter this problem:
Tap on locking lug with a hammer, snap impact into socket, set to reverse, and profit.
"HammerheadFistpunch" (hammerheadfistpunch)
07/18/2017 at 16:28, STARS: 2
but...an axe...why? Why did they think that would do anything good?
"TheTurbochargedSquirrel" (thatsquirrel)
07/18/2017 at 16:30, STARS: 0
I kinda want to know how far out of balance it is now.
"Urambo Tauro" (urambotauro)
07/18/2017 at 16:31, STARS: 0
Drill. The. Stud.
"McMike" (mcmike)
07/18/2017 at 16:35, STARS: 4
Fuckin’ Juggalos
"razorbeamteam" (razorbeamteam)
07/18/2017 at 16:36, STARS: 2
Better question, why a screwdriver and needle nose pliers?
"razorbeamteam" (razorbeamteam)
07/18/2017 at 16:37, STARS: 0
Well, they probably tried that already considering they used “every tool possible”
"Jcarr" (jcarr)
07/18/2017 at 16:37, STARS: 0
People are dumb: http://www.nbcnews.com/id/21758302/ns/us_news-weird_news/t/they-taught-us-shop-class-use-right-tool/#.WW5xVoTyuos
"Pilot of the Clown Shoe" (csp2)
07/18/2017 at 16:38, STARS: 0
“would of went”? really?
*grammar nazi twitch*
"Arrivederci" (arrividerci)
07/18/2017 at 16:39, STARS: 0
Well, you’re also logical and intelligent ;).
"Brian, The Life of" (familycar)
07/18/2017 at 16:47, STARS: 0
“ ... and an axe.”
"Flynorcal: pilot, offshore sailor, car racer and panty thief" (flynorcal)
07/18/2017 at 16:48, STARS: 0
Meth use or a lumberjack got a flat.
I know which one I think is correct.
"E92M3" (E46M3)
07/18/2017 at 16:51, STARS: 0
Would HAVE went
Happy?
"Rust and Dust - Oppositelock Forever" (rustanddust)
07/18/2017 at 16:52, STARS: 1
Aah, you’re right.
Extraction sockets only work on timid lock nuts, not bold ones.
"Pilot of the Clown Shoe" (csp2)
07/18/2017 at 17:09, STARS: 1
*twitch* no.
would have gone
"Rusty Vandura - www.tinyurl.com/keepoppo" (rustyvandura)
07/18/2017 at 17:23, STARS: 0
I’d start with a hole saw and cut the wheel around the stud. Then, maybe a Vise Grip.